Heat Pumps in Clovis, CA
A heat pump handles both sides of the Clovis year from one system: months of extreme cooling and genuine winter nights. The engineering question is sizing it for both. Compare three quotes from licensed local contractors.
Or call us: 760-223-7267
✅ Licensed & Pre-Screened Contractors
💰 Best Price Guarantee
⚡ Fast & Free — No Obligation
📊 Transparent Pricing Comparison
🏠 Local Experts Who Know Your Area
🕐 Same-Day Quotes Available
AI Matched Contractors
Our technology helps match you with trusted, top-rated HVAC pros so you can compare price, service, equipment, and warranty.
Get Your Free Quote Now
Heating +
Heating + Cooling in One
High
High Efficiency
Lower
Lower Year-Round Bills
100%
100% Licensed
3
3 Free Quotes
Understanding Heat Pumps
One System for Both Valley Extremes
Clovis is a demanding climate in both directions. Summers require sustained cooling against design temperatures above 105°F, and winters bring frost and multi-day Tule fog. Most homes address this with two separate systems: an air conditioner and a gas furnace.
Replacing both air conditioner and furnace at once • Wanting to reduce or eliminate gas appliances • Qualifying for conversion incentives • Homes with no existing gas service • Room additions and ADUs • Long cooling seasons that reward efficiency
A heat pump does both. It cools exactly as an air conditioner does in summer, then reverses to extract heat from outdoor air in winter. Because you are already buying substantial cooling capacity, the incremental cost of adding heating capability is smaller than purchasing a separate furnace.
Why Act Fast
Signs a Heat Pump Makes Sense
AC and furnace both aging
Both Your AC and Furnace Are Near End of Life
Want lower bills
You Want to Reduce Gas Appliances in the Home
Going all-electric
You Are Building an Addition or ADU
Have or plan solar
Your Summer Runtime Makes Efficiency Worth Paying For
Want even comfort
You Want to Capture Available Conversion Rebates
The Sizing Trade-Off Nobody Explains
A heat pump must serve two loads that peak in opposite seasons. In Clovis the cooling load is the larger of the two, so sizing usually follows it, and the system must then be checked to confirm it heats adequately on the coldest local nights. Ask each contractor what heating output the proposed unit delivers at local design temperature and whether supplementary heat is included.
Key Details
Ducted vs. Ductless Heat Pumps
What a complete Clovis heat pump quote includes
01
Ducted
Dual load calculation covering both cooling and heating design days
02
Ductless (mini-split)
Heating capacity stated at local winter design temperature
03
Efficiency
Electrical panel capacity verified, the most common hidden cost
04
Evaporator or condenser coil work
Ductwork assessed if the system will be ducted
05
Compressor repair/replacement
Supplementary heat strategy specified if required
06
Thermostat or control board
Rebates identified with paperwork responsibility confirmed
The Process
What to Expect From a Heat Pump Installation
💰
Load calc & assessment
Heating and Cooling From One System
🏠
System selection
No Combustion, Flue or Gas Line
🔧
Installation
Largest Available Rebates and Incentives
🌬️
Commissioning
Strong Efficiency Over Long Cooling Seasons
📈
Compare Quotes
Fewer Systems to Maintain
🤫
Peace of Mind
Three Competing Quotes to Compare
Choosing Right
How to Choose a Heat Pump Contractor in Clovis
The questions that reveal whether the system was actually designed
Key Factors to Consider
- Dual-Season Load Calculation
A heat pump serves two loads. Require calculations for both, and ask which one drove the equipment selection. - Heating Output at Design Temperature
Ask for capacity at the local winter design temperature, not the nominal rating. Output falls as it gets colder, and this is the number that matters in a fog week. - Electrical Panel Verified
The most common hidden cost. A thorough contractor inspects the panel during the assessment and prices any upgrade in the original quote. - Rebate Handling Confirmed
Conversion incentives are the largest currently available. Ask which apply to the quoted model and whether the contractor files the paperwork.
Repair vs. Replace Decision Guide
🌬️ Ducted Heat Pump:
- Sound ductwork already present
- Whole-home from one system
- Single thermostat
- Replaces AC and furnace together
❄️ Ductless Heat Pump:
- No usable ductwork
- Older homes near Old Town
- Zoned room-by-room control
- No attic duct losses
💡 Pro Tip
1. Ask for the heating output at local design temperature, not the nominal rating
2. Confirm electrical panel capacity early — it is the most frequent hidden cost
3. Ask whether supplementary heat is included and under what conditions it runs
4. Confirm which rebates apply and whether the contractor files the paperwork
Why Payback Is Faster Here
Heat pump economics depend on operating hours, and Clovis supplies plenty. A four-month cooling season plus winter heating means the equipment runs a large share of the year, so the efficiency advantage accrues faster than it would in a mild climate. Combined with conversion incentives, that shortens the payback period considerably. Ask for estimated annual operating cost rather than relying on efficiency ratings alone.
Expert Advice
What Clovis Homeowners Say
1
One Heat Pump Replaced Two Systems
Replacing the AC and furnace together with one heat pump cost less than two separate systems and the rebates were substantial.
2
They Flagged the Panel Upfront
Only one contractor told us the panel needed upgrading. Learning that up front rather than mid-install mattered.
3
I Asked for Design-Temperature Output
I asked for heating output at our coldest design temperature. Two contractors could not answer, which told me who to hire.
4
Cools Like the Old AC, Heats Too
It cools as well as our old air conditioner did and heats fine through fog weeks. One system instead of two.
Know Your Options
When to Repair vs. When to Replace
🔧 Repair Makes Sense If...
• Sound existing ductwork throughout
• Whole-home load from one system
• Single thermostat operation
• Lower cost per conditioned room
VS
✨ Consider Replacement If...
• No usable ductwork present
• Garage, ADU or addition
• Room-by-room control wanted
• Avoids attic duct losses entirely
Complete Guide
Complete Guide to Heat Pumps in Clovis
How a Heat Pump Works in Both Seasons
A heat pump moves heat rather than creating it. In summer it removes heat from indoor air and rejects it outdoors, which is exactly what an air conditioner does. In winter the cycle reverses and it extracts heat from outdoor air — even cold air contains usable heat — and delivers it inside.
Because it moves heat instead of burning fuel, it can deliver more heating energy than the electrical energy it consumes, which is why efficiency figures look unusual compared with a furnace.
For Clovis the appeal is consolidation. One outdoor unit and one indoor unit handle a demanding cooling season and a genuinely cold winter, with no combustion, no flue and no gas line. Given that the cooling equipment is necessary regardless, adding heating through the same system is generally cheaper than buying a separate furnace.
Sizing for a Climate With Two Extremes
This is where Clovis heat pump installations succeed or fail, and it deserves direct questions.
The cooling load here is large, driven by design temperatures above 105°F. The heating load is real but smaller. Sizing normally follows the cooling load, after which the contractor must verify the unit still produces enough heat on the coldest local nights, because heat pump capacity declines as outdoor temperature falls.
Ask for two numbers: the cooling capacity at design conditions, and the heating capacity at local winter design temperature. A nominal rating measured at mild conditions does not answer the winter question. If output falls short on the coldest mornings, the answer is usually modest supplementary electric heat, which is fine — provided it is planned and disclosed rather than discovered in January.
The Electrical Panel Question
The most common unexpected cost in a Clovis heat pump project is electrical, and it is easy to check early.
A heat pump replaces gas heating with electric heating, which increases electrical demand. Add any supplementary heat strip and the requirement grows further. Older tract homes may have panels without the spare capacity to support that, and the upgrade is a real expense.
Raise this during the first assessment. A contractor who inspects the panel and prices any upgrade in the original quote is giving you an accurate number. One who does not may present a lower quote that grows once work begins. This single question is often the clearest way to distinguish a thorough quote from an optimistic one.
Ducted or Ductless in Clovis
Heat pumps come in both forms, and the right choice in Clovis usually depends on the state of your ductwork.
If the home has sound ducts, a ducted heat pump replaces the existing air conditioner and furnace with a single system using the distribution already in place. If the ducts leak badly or run through a punishing attic, that leakage will undermine the new equipment exactly as it undermined the old.
Where ducts are absent or in poor condition — common in older homes near Old Town — a ductless heat pump avoids the problem entirely by delivering conditioned air directly into each room. It also allows zoning, so you heat and cool only occupied spaces. Ask for the duct condition to be assessed before the format is decided, because that assessment should drive the recommendation.
Why Rebates Make the Math Work
Heat pump conversion currently attracts the largest incentives available in residential HVAC, and they can materially change the comparison against a furnace-plus-air-conditioner replacement.
Programs operate at federal, state and utility level, they have differing equipment requirements, and they change periodically. That complexity is precisely why the contractor's role matters: ask which programs apply to the exact model quoted, what the expected amounts are, and whether they prepare and submit the paperwork or leave it with you.
Be careful comparing quotes on pre-rebate or post-rebate figures inconsistently, since that can make one option look artificially better. Ask every contractor for both numbers. And confirm equipment registration is handled, because missed registration can reduce manufacturer warranty coverage on equipment you expect to run for fifteen years or more.
Where We Serve
Heat Pumps for Clovis Homes
Clovis neighborhoods and nearby Fresno County communities we cover
📍 Old Town Clovis
📍 Harlan Ranch
📍 Loma Vista
📍 Tarpey Village
📍 Fort Washington
📍 Woodward Park
📍 Clovis
📍 Sanger
Common Questions
Heat Pumps FAQ — Clovis Homeowners
Do heat pumps work well in Clovis's hot Central Valley summers?
Heat pumps handle Clovis's hot, dry summers effectively since modern models are built to move heat efficiently in both directions, cooling the home in summer and heating it in winter. Performance depends on correct sizing for the Central Valley's temperature extremes.
Do heat pumps work in Clovis heat and Tule fog?
Yes, provided it is sized and configured properly. Clovis winters include frost and prolonged Tule fog, and heat pump output declines as outdoor temperature falls. Ask for the heating capacity at local design temperature and whether supplementary electric heat is included. Configured correctly, a heat pump handles local winters without difficulty.
Why compare three heat pump quotes?
Comparing three quotes matters here because approaches differ substantially. Contractors may propose different capacities, different formats, and different supplementary heat strategies, and only some will have checked your electrical panel. Reviewing three reveals who calculated both loads and who simply matched the equipment already installed.
Will a heat pump cool as well as my air conditioner does?
In cooling mode a heat pump is an air conditioner — the same refrigeration cycle and the same performance for a given capacity. Provided it is sized for the local cooling design temperature above 105°F, it will cool exactly as well as a comparable air conditioner. The heating function is added capability, not a compromise on cooling.
Can a heat pump replace an old swamp cooler in a Clovis home?
Many older Clovis homes still rely on swamp coolers, which don't handle humidity or provide heating, so switching to a heat pump usually means adding new ductwork or refrigerant lines where the swamp cooler system never needed them. Plan for that added work.
What should a heat pump quote include?
Ask for the cooling capacity at local design conditions, the heating capacity at winter design temperature, the electrical requirement including any panel work, the ductwork assessment if ducted, and the supplementary heat strategy. Those five items describe whether the system was designed for your house or selected from a catalogue.
Is a heat pump cheaper to run than a gas furnace in Clovis?
It depends on local electricity and gas rates, which change, so ask for estimated annual operating cost for both options rather than accepting a general claim. What is reliably true is that consolidating heating and cooling into one system reduces equipment and maintenance costs, and that local cooling runtime makes the efficiency advantage accrue quickly.
What warranty does a heat pump carry?
Ask for the manufacturer equipment warranty and the contractor labor warranty separately and in writing, and confirm who registers the equipment within the manufacturer's window. Since a heat pump runs in both seasons rather than sitting idle half the year, also confirm whether coverage requires documented annual maintenance.
What is supplementary heat and will mine use it often?
Supplementary heat is usually an electric resistance element that assists on the coldest mornings when heat pump output alone falls short. In Clovis it typically runs only during frost nights or extended fog events. Ask the contractor under what outdoor temperature it engages and how much it is expected to be used, since it is less efficient than the heat pump itself.
Is a permit required for heat pump installation?
Yes, and a permitted installation is inspected for refrigerant line sizing, electrical connection, condensate drainage and equipment clearances against current code. Permits also matter for rebate eligibility on many programs and protect you at resale. If a contractor proposes skipping the permit, choose a different contractor.
Should I choose a ducted or ductless heat pump?
Ductless suits homes without usable ductwork — common in older Clovis housing — and allows zoning so you condition only occupied rooms. Ducted suits homes with sound existing ducts and provides whole-home comfort from one thermostat. Have the duct condition assessed first, because that assessment should determine the recommendation rather than contractor preference.
What rebates are available for heat pumps?
Incentives for heat pump conversion are currently the largest in residential HVAC, spanning federal, state and utility programs with differing equipment requirements. Ask which apply to the exact model quoted, request both pre-rebate and post-rebate pricing from every contractor so comparisons are consistent, and confirm who prepares and submits the paperwork.
More Services
Related HVAC Services in Clovis
AC Repair
Fast, reliable AC repair for Clovis homes — diagnose and fix cooling issues.
Air Conditioning
Professional AC installation and system upgrades for year-round comfort.
AC Replacement
Complete AC unit replacement with modern, high-efficiency systems.
HVAC Maintenance & Tune-Up
Preventive maintenance to extend system life and reduce breakdowns.
Heating & Furnace Repair
Expert diagnosis and repair for all furnace and heating system issues.
Furnace Replacement
Upgrade your heating system for better efficiency and lower energy bills.
Mini-Splits & Ductless
Ductless solutions for room-by-room climate control without ductwork.
Ductwork
Duct repair, sealing, replacement, and cleaning for optimal airflow.
Indoor Air Quality
Air filtration, purification, and ventilation for healthier indoor air.
Get Three Heat Pump Quotes in Clovis
Compare equipment, capacity and pricing from licensed Fresno County contractors. Free, fast and no obligation.